PLA Filament 1.75 mm – Transition Color

PLA filament by 3DPlast

Color: Transition Color
Filament diameter: 1.75 mm
Spool size: 0.85 kg

Color note: Transition color is produced while changing from one production color to another. The shade is unpredictable and can vary from spool to spool; it is not a controlled gradient or dual-color filament.

Easy-to-print filament for clean, detailed models with low warping. Suitable for beginners, prototyping, decorative parts, educational projects, figures, enclosures, and light-duty components.

• Nozzle: 190–220°C
• Build plate: 50–70°C; some printers can print PLA without bed heating
• Recommended drying: 3–4 hours at 45–50°C
• Storage: sealed container or bag with desiccant

• Low shrinkage and good dimensional accuracy
• Smooth surface finish and strong detail reproduction
• Low printing odor
• Lower heat resistance than PETG or ABS; softening begins around 60°C

Using a Bambu Lab AMS? Our 0.85 kg and 0.75 kg spools need a small, free mod to feed reliably: printed rollers that replace the rubber sleeves on the AMS roller shaft (2 per slot, PLA or PETG, no supports, fully reversible). The 3 kg and 2.5 kg spools are not designed for the AMS; use an external spool holder.

Get the free model on MakerWorld →

• Return policy