PETG Filament 1.75 mm – Transparent

PETG (CoPET) filament by 3DPlast

Color: Transparent
Filament diameter: 1.75 mm
Spool sizes: 0.85 kg, 3 kg

A strong, moderately flexible filament with good impact, moisture, and chemical resistance. PETG combines easier printing than ABS with better toughness and temperature performance than PLA.

• Nozzle: 220–250°C
• Build plate: 70–90°C
• Recommended drying: 4–6 hours at 65–70°C
• Storage: sealed container with desiccant

• High strength with moderate flexibility
• Low shrinkage and good layer adhesion
• Resistant to moisture and many chemicals
• Transparent colors can produce a glossy finish
• Fine temperature and retraction tuning helps reduce stringing

Typical uses include protective covers, containers, panels, prototypes, and medium-duty functional parts.

Using a Bambu Lab AMS? Our 0.85 kg and 0.75 kg spools need a small, free mod to feed reliably: printed rollers that replace the rubber sleeves on the AMS roller shaft (2 per slot, PLA or PETG, no supports, fully reversible). The 3 kg and 2.5 kg spools are not designed for the AMS; use an external spool holder.

Get the free model on MakerWorld →

• Return policy