ABS Filament 1.75 mm – Graphite

ABS filament by 3DPlast

Color: Graphite
Filament diameter: 1.75 mm
Spool sizes: 0.75 kg, 2.5 kg

A durable engineering filament with high impact strength and better heat resistance than PLA or PETG. Best results are achieved on an enclosed printer with good ventilation.

• Nozzle: 230–260°C
• Build plate: 90–110°C
• Recommended drying: 4–6 hours at 70°C
• Storage: sealed container with desiccant

• High mechanical strength and impact resistance
• Softening temperature around 105°C
• Can be sanded, glued, painted, or acetone-smoothed
• Prone to warping during cooling; use an enclosure and reliable bed adhesion
• Print in a well-ventilated area

Typical uses include electronics housings, tools, fixtures, automotive parts, and functional prototypes.

Using a Bambu Lab AMS? Our 0.85 kg and 0.75 kg spools need a small, free mod to feed reliably: printed rollers that replace the rubber sleeves on the AMS roller shaft (2 per slot, PLA or PETG, no supports, fully reversible). The 3 kg and 2.5 kg spools are not designed for the AMS; use an external spool holder.

Get the free model on MakerWorld →

• Return policy