Filament ABS
Heat- and impact-resistant for parts that work in demanding conditions. Best printed with a heated bed and an enclosure. Available in 0.75 kg and 2.5 kg spools.
Häufige Fragen
Which printers is it for?
FDM 3D printers that use 1.75 mm filament, with a heated bed and ideally an enclosure. Recommended settings: nozzle 230–260 °C, bed 90–110 °C.
How do I dry and store ABS?
If the filament has absorbed moisture, dry it for 4–6 hours at 70 °C. Store spools in a sealed container with desiccant.
Why do my ABS prints warp?
Usually because the part cools unevenly. Use an enclosure, avoid drafts, keep the bed at 90–110 °C and make sure the first layer sticks well.
Do your spools work with the Bambu Lab AMS?
Yes. The 0.85 kg and 0.75 kg spools work in the AMS with a free printable roller mod: 2 printed rollers per slot, fully reversible. You'll find the link on every product page.
About our ABS filament
3DPlast ABS filament 1.75 mm is made at our own factory in Ukraine. ABS is heat- and impact-resistant, which makes it a solid choice for technical parts, housings and components that work in warm conditions.
ABS needs a heated bed and prints best in an enclosed printer: a stable temperature reduces warping and cracking between layers. Print in a well-ventilated room. Available in 0.75 kg and 2.5 kg spools.